Journal Report

3D Printing and Additive Manufacturing

Download PDF
Journal Information
Journal Title
3D Printing and Additive Manufacturing
Publisher
ISSN
2329-7670
E-ISSN
2329-7662
Database
ERIH PLUS
Domain
Health Sciences, Physical Sciences
Classification History
Year A+ A B C
2026 ✓
2025
2024
2023
2021/2022
2020
2019
2018
A journal may have more than one classification in the same year. All recorded classifications are displayed.
Recent Articles
A Robust Direct Slicing Method for Strut-Based Lattice Structures
Zhuangyu Li, Wei Cao, Hailin Li et al.
2026-10-8
DOI: 10.1177/23297662261492603
Flexural Properties and Failure Mechanics of Morphology-Driven Mechanical Metamaterials Fabricated Using Acrylonitrile Butadiene Styrene Material on Fused Deposition Modeling Process
Salem Bashmal, Aamer Nazir
2026-10-2
DOI: 10.1177/23297662261492607
Phase-Field Simulation of <i>β</i> → <i>α</i> Phase Transformation in TC4-DT Titanium Alloy During Directed Energy Deposition: Effects of Elastic Strain Energy, Cooling Rate, and Oscillating Laser Heat Source
Yuting Liu, Mingwei Chen, Dong Ding et al.
2026-9-30
DOI: 10.1177/23297662261492541
Temperature-Driven Modeling of Foamed VarioShoreTPU for the Optimization of Hardness Distribution in Prosthetic Stems
Łukasz Gałeczka, Małgorzata Muzalewska, Marek Wyleżoł
2026-9-29
DOI: 10.1177/23297662261476738
Influence of Circular Texture Diameter on Surface Properties of TC4 Titanium Alloy Prepared by One-Step Additive Manufacturing
Jiaqi Wang, Bin Tian, Zehao Liu et al.
2026-9-26
DOI: 10.1177/23297662261492598
Enhancement of the Fatigue Performance of 17-4PH Stainless Steel Material Extrusion Products by Vibration-Assisted Machining
Shijie Jiang, Jingjie Liu, Shanggang Cai et al.
2026-9-16
DOI: 10.1177/23297662261477783
Adaptive Path Planning and Process Optimization for FDM of Structural Components with Complex Geometric Features
Fei Zhang, Meilin Gong, Min Wang et al.
2026-9-8
DOI: 10.1177/23297662261475740
Prediction of Directional Growth Proportion in Laser-Directed Energy Deposition of DD6 Single-Crystal Superalloy Based on Physically Constrained Neural Networks
Shiqing Guo, Yanhua Zhao, Yingbo Lyu et al.
2026-8-26
DOI: 10.1177/23297662261483788
Low-Cost, Open-Source Design and FDM Fabrication of Patient-Specific Orthopedic Forearm Casts from Consumer RGB-D Scanning
Aysha AlAjmi, Nora AlHajeri, Rose AlAjmi et al.
2026-8-21
DOI: 10.1177/23297662261477132
Hollow Ceramic Components via Multi-Material Co-Extrusion 3D Printing
Ariel Cheng Sin Lim, Benjamin Dillenburger
2026-8-17
DOI: 10.1177/23297662261478336
Articles retrieved from Crossref.
Green Journals | https://www.green-journals.com | info@green-journals.com
Printed: October 25, 2026 13:54